HTIRC Hornet 20A 30A 40A 50 A 60A 80A 100A ESC For RC Plane Heli

HTIRC Hornet Brushless ESC

The Hornet ESC is a PERFECT MATCH for Our New High Performance Surpass Hobby Brushless Motor

 

HTIRC Hornet Series 30A

(30 AMP) 2-4S Brushless ESC With 5V/2A SBEC For RC Airplane

1. Product Model: Hornet 30A BEC
2. Product Number: FD-H105
3. Continuous/Burst Current: 30A/40A
4. Input: 2-4Lipo/5-18NC
5. BEC Output: BEC 5V/2A
6. Size: 30*24*8.5mm
7. Weight: 21g

HTIRC Hornet Series 40A HV

High Voltage 2-6S Brushless ESC With 5V/4A SBEC For RC Airplane

1. Product Model: Hornet 40A HV SBEC
2. Product Number: FD-H107
3. Continuous/Burst Current: 40A/50A
4. Input: 2-6Lipo/5-18NC
5. BEC Output: SBEC 5V/4A
6. Size: 52*25*11mm
7. Weight: 43g

HTIRC Hornet Series 60A

(60 AMP) 2-6S Brushless ESC With 5V/6A SBEC For RC Airplane

1. Product Model: Hornet 60A SBEC
2. Product Number: FD-H109
3. Continuous/Burst Current: 60A/80A
4. Input: 2-6Lipo/5-18NC
5. BEC Output: SBEC 5V/6A
6. Size: 52*25*11mm
7. Weight: 43g

HTIRC Hornet Series 80A/100A

2-6S Brushless ESC With 5V/6A SBEC For RC Airplane

Here we have the NEW UPGRADED Monster Plane brushless ESC that I use for my Monster builds.
This unit gives extremely reliable performance and when matched with the Monster Motor 4250, 5055 and 5065
delivers a wide range of capability. The Heat Sink offers superb heat dissipation.
I also use this on my TRex 600, On my Monster 7 Foot F4U Corsair, 7 Foot Spitfire
All work well without any issues.

Comes with XT 60 connection and pre soldered 4mm plugs

1. Product Model: Hornet 80A SBEC
2. Product Number: FD-H110
3. Continuous/Burst Current: 80A/100A
4. Input: 2-6Lipo/5-18NC
5. BEC Output: SBEC 5V/6A
6. Size: 62*35*12mm
7. Weight: 72g

 

HTIRC Hornet Series 100A/120A

2-6S Brushless ESC With 5V/6A SBEC For RC Airplane

Comes with XT 60 connection and pre soldered 4mm plugs

1. Product Model: Hornet 100A SBEC
2. Product Number: FD-H111
3. Continuous/Burst Current: 100A/120A
4. Input: 2-6Lipo/5-18NC
5. BEC Output: SBEC 5V/6A
6. Size: 62*35*12mm
7. Weight: 73g

 

HTIRC Programming Card

For our new lineup of High Efficiency High Performance Hornet ESC's we now have the Program Card to go with it.
So that you can customize to your standards.
It is super simple to use. Set the pins to the values you want.
Connect your esc to a motor w/o a prop attached for safety (so that you can hear the beeps)
then you plug in the signal line to the program card,
then you connect the battery to the ESC, you will hear one beep when programmed correctly,
that's it. Super simple.

Thank you for purchasing HTIRC Program Card for Hornet & Dragonfly
Series ESC (Electronic Speed Controller). Please read the user manual before programming HTIRC ESC.

Introduction:
The Program Card can be used to set programmable parameters of Hornet & Dragonfly series
ESC. With a friendly user interface, it is very easy and convenient to operate.
Before using, please make sure the Program Card and ESC under the
same communications protocol.

Specifications:

Input Voltage: 5.0--8.0V

Set the jumpers on program card for the settings you want

Programming

* Prepare your program card, DC power supply, ESC and motor.
(Please do not install propeller while programming)
* Connect the ESC to the motor/Signal Wire to the Program Card/ESC to the battery pack.
* For the ESC without BEC built-in(OPTO), you need to connect the extra power (5.0-8.0V)
to the Program Card.
* You should hear one short Beep that your settings are confirmed and stored. If you hear four
Beeps, the settings are invalid and you should check and reset.



For RC Plane, RC Helicopter, RC Heli, Robotics, Experiments, Engineering, Scientists, Builders, Scratch Builders, Custom RC Planes, FPV wings, larger Drones and many other uses. Air Boats, Drills, CNC Machines, ERC Timesaves