A2217 1100kv | 40A 4s ESC 4x MG90s Servos w/10x4.5 PROP

Also Don't forget your Wire Kit , Spare Props, and Flight Stabilizer 

New Scratch Build Power Packs. A2217 1100kv Brushless Motor with 40 Amp ESC
you pick battery connector. Comes with the MG90s 14 Gram Metal Gear Servo. These servos can take some bashing and keep working great. Great for
beginners or for that build that you want to last a really long time.

I use this kit in my Scratch Build Spitfire, F4U Corsair, P-51 Mustang and FPV Spear. It gives excellent performance and flight times. I pair this with Batteries from 3s to 4s ranging from 2200mah 3s to 3000mah 4s.

here is some video of this kit in action

Please Note: When running your ESC, make sure that it has adequate ventilation. These ESC's Motors and Servos Are All Tested before I ship them to you, so I guarantee my Products so you can have worry free Fun in the Air.


Prop Specs

GEMFAN 10x4.5" 1045 CW+CCW FPV Multi-Copter RC Quad Copter, Plane, Airplane, Drone, Sailboat,
Science Projects
Rotor diameter 25.4CM
Aperture: 6MM
With paddle pad 3MM 4MM 5MM 6MM 7.8MM
Applicable Four aircraft or multi-rotor
Dimensions: 10 x 5
Weight: 15g (about / single)
Center Hole Diameter: 6.0mm (adjustable ring adjustable)
Centre Block thickness: 9.7mm
Adapt Wheelbase: 550mm - 700mm
Matching motor: 800KV-1200KV


Motor Spec

Shaft Diameter 4.0mm
KV: 1100
Size: approx. 27.8x32mm / 1.09x1.26inch.
Package Includes:
1 Set A2217 1100KV Brushless Motor
Product Name: A2217 KV1100 8T external brushless motor
Dimensions: 27.8*32mm
Weight: 68 grams


Test Data:

GWS1060HD:
11V 19.5A 8450 rpm, thrust 1012 g
10.5V 17.4A 8220 rpm, thrust 953 grams
10V 17.2 8030 turn, thrust 903 g
9.5V 15.9 7730 turn, thrust 830 grams



ESC: Specifications

Material: Plastic, Metal
Color: As Picture Shown
Weight: 34g
Size: approx. 55*25mm/2.2*1 inch
Type: RC Parts and Accessories
Firmware: Hobbywing
Power Input: 7-16.8V 2-4S Li-Poly
BEC: 3A
Continuous Current: 40A(50A for 8 seconds)


MG90s Metal Gear Servo

Can handle Voltage from 4.8v to 6.0vTorque @ 4.8V is 2.2kg/cm Torque
@ 6v is 2.5kg/cm
Spline Count= 20

90° Degrees MG90S Metal Gear Servo
1. For Boat Car/ Plane/Helicopter Trex 450/ Gaui 450/ Gartt 450/
KDS 450/ HK450 ALZRC 450, Blade 300 and many more
2. Dimensions: 23 x 12.2 x 29mm/Robot
3. Weight:. 20g
4. Operating Speed : (4.8V no load): 0.11sec / 60 degrees
(6.0V no load): 0.10sec / 60 degrees
5. Stall Torque (4.8V): 2.2 kg/cm
6. Stall Torque (6.0V): 2.5 kg/cm
7. Temperature Range: - 30 to + 60 degree
8. Dead Band Width: 10us
9. Connector Wire Length 150mm
10. Interface Specifications: JR / FP General
11. Accessories: Multi-arm, fixing screws
12. Scope: Helicopters KT, fluttering, gliding, small robots, etc.
13. Recommend Model: Mini Car /Ship / Helicopter & Airplane/ Fixed Wing / FPV Drone