POWERFUN 70mm 12 Blade 2300KV EDF 6S LiPO W/ 80A ESC 80 Amp Esc for RC JET Plane

$84.99
Unit price per

Shipping calculated at checkout.

PowerFun 70mm EDF 6s 2300kv

and

HOBBYWING Skywalker 80 Amp ESC Version 2 with Reverse Thrust Braking

COMBO

This EDF system was factory balanced by a balancing machine. It is strongly recommended not to disassemble the fan unit and motor, otherwise the dynamic balance would be lost.

EDF Features

High performance 70mm 12 blade EDF unit.

Motor already installed, dynamic balanced by factory.

With removable horn shape intake ring included.

12 blade fan produces more realistic, lower-pitch sound.

Suitable for most 70mm EDF jets on the market. For some jets, removal of some foam might be needed to accommodate.

EDF Description

Outside Diameter: 75.7mm

Ducted Fan Length: 65mm ( With wing intake ring )

Rotor DIameter: 69.4mm, 12 blades

Overall Weight: 178g (Fan + Motor)

Motors: 2300KV Outrunner Brushless Motor

Poles: 2

Recommended Power Source: 6S LiPO

Static Thrust: Up to 2200g at 25.2V (65A)

Connector: 4.0 mm Bullet Connector

HOBBYWING SkyWalker 80 Amp ESC

XT60 w/4.0 mm plugs

This is the Recommended EDF/ESC combo For the New

FLITETEST Master Series F16 Viper and more...

Scratch Build Plane. Also works for other RC Planes and Jets, E-Flite Power 32, Power 46 and Power 60 Motors, We also carry a nice selection of 4250 and 5065 Monster Motors that work great with this ESC as Well.

80 AMP V.2 w/Reverse

Item Name: 80A Version 2 UBEC

Type: Brushless ESC, Regular voltage

Features REVERSE

32 Bit ARM Processor at 96Mhz

Programmable with Hobbywing LED Program Box, or via Transmitter

Cont./Peak Current: 80A/100A

Input: 2-6S LiPo,5-18s Ni-MH

BEC Output: Switch Mode--5V,7A

Input Wires: Red-12AWG-150mm*1,Black-12AWG-150mm*1

Output Wires: Black-14AWG-100mm*3

Input Connectors: NO

Output Connectors: 4.0mm Banana Plugs

Firmware Upgrade: Not Supported

Size: 86.0x38.0x12.0mm

Weight: 82g

ESC Features

Safety Arming Feature

Regardless of the throttle stick position, the motor will not spin when Battery is first connected.

Throttle Calibration

Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.

Programmable Items

Brake Setting: brake enabled / brake disabled.

Battery Type: Li-xx (Li-ion or LiPo) / Ni-xx (NiMH or NiCd).

Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.

Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.

Start Mode: normal / soft / very soft.

Timing: low / medium / high.

Lipo Battery Cells: Auto calculate / Set the cells number manually.

Reset: the programmable items to its default setting.

Full Protection Features

Low voltage cutoff protection

Over-heat protection

Throttle signal lost protection

Thank you for stopping and shopping 🙏

Customer Reviews

Based on 1 review Write a review