{"title":"Retro Computer Presentation Stands and Wall Mount","description":"\u003cp\u003eDisplay your Retro Computer love, Use these beautiful, heavy duty 70-80% Infill, Presentation Stands and Wall Mounts to proudly display your RETRO Computer.  Various Commodore, Amiga, Atari, Mega65 and TI99\/4a Models Available. These are built to last!! \u003c\/p\u003e","products":[{"product_id":"amiga-1200-presentation-stand-and-wall-mount","title":"Amiga 1200 Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an Amiga 1200.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Amiga 1200 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the 2\" screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Amiga 1200.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216338100467,"sku":"A1200-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/IMG_3043.jpg?v=1780884826"},{"product_id":"amiga-1200-presentation-stand-and-wall-mount-copy","title":"Amiga 500 Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an Amiga 500.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Amiga 1200 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the 2\" screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Amiga 500.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216353009907,"sku":"A500-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/IMG_3040.jpg?v=1780885111"},{"product_id":"amiga-500-presentation-stand-and-wall-mount-copy","title":"Amiga 600 Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an Amiga 600.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Amiga 1200 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the 2\" screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Amiga 600.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216409829619,"sku":"A600-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/IMG_3046.jpg?v=1780885391"},{"product_id":"amiga-600-presentation-stand-and-wall-mount-copy","title":"Atari 1040ST , 4160ST  Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an Atari 1040ST.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Amiga 1200 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the 2\" screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Atari 1040ST.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216427000051,"sku":"AT1040ST-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/IMG_3066.jpg?v=1780885739"},{"product_id":"atari-1040st-4160st-presentation-stand-and-wall-mount-copy","title":"Atari 1200XL  Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an Atari 1200XL.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Amiga 1200 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the 2\" screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Atari 1200XL\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216457605363,"sku":"AT1200XL-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/IMG_3049.jpg?v=1780886009"},{"product_id":"atari-130xe-presentation-stand-and-wall-mount","title":"Atari 130XE  Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an Atari 130XE.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Amiga 1200 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the 2\" screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Atari 130XE\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216481296627,"sku":"AT130XE-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/IMG_3068.jpg?v=1780886170"},{"product_id":"atari-600xl-presentation-stand-and-wall-mount","title":"Atari 600XL  Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an Atari 600XL.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Amiga 1200 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the 2\" screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Atari 600XL\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216496566515,"sku":"AT600XL-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/IMG_3057.jpg?v=1780886313"},{"product_id":"atari-65xe-presentation-stand-and-wall-mount","title":"Atari 65XE  Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an Atari 65XE.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Amiga 1200 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the 2\" screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Atari 65XE\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216502333683,"sku":"AT65XE-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/IMG_3073.jpg?v=1780886427"},{"product_id":"atari-800xl-presentation-stand-and-wall-mount","title":"Atari 800XL  Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an Atari 800XL.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Amiga 1200 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the 2\" screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Atari 800XL\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216503218419,"sku":"AT800XL-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/IMG_3052.jpg?v=1780886564"},{"product_id":"commodore-breadbin-presentation-stand-and-wall-mount-slim-case","title":"Commodore Breadbin Presentation Stand and Wall Mount (Slim Case)","description":"\u003cdiv class=\"col-sm-8\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab-description\"\u003e\n\u003cp\u003eHave you been wanting to display your various Commodore breadbin computers in a manner that keeps them safe, allows you to gaze upon them all the time and handy when you want to use them?\u003c\/p\u003e\n\u003cp\u003eThis product will do just that for you and more.  It's comprised of two brackets specifically designed to allow your Commodore breadbin computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Vertical spacing of the holes in the bracket is 2 1\/4\".  Bracket holes should be 15 1\/4\" horizontally.  Measurements are center hole to center hole.   Simply mark where you want your computer to hang, level your horizontal 15 1\/4\" line and install star plugs if there is no stud in behind the wallboard.  Measure down 2 1\/4\" and repeat.\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for slim breadbin cases.  Look at the provided photo to determine what style of mount you need.\u003c\/p\u003e\n\u003cp\u003eAll Commodore 16's are slim breadbin cases.  C64's and VIC-20's may be either style.  Please double check before ordering to ensure you get the correct bracket set to fill your needs. \u003c\/p\u003e\n\u003cp\u003eOn the last photo, the white case on the left is a slim version of the breadbin case, and the brown case on the right is the thick version of the breadbin case.  The difference in thickness between the two case types is 4mm in thickness.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-4\"\u003e\n\u003cdiv class=\"btn-group\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eWhite is the Basic Color Choice, you can ask for specific color of your choice.\u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216506724595,"sku":"BB-Slim-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/sm_IMG_4187-500x500.jpg?v=1780886915"},{"product_id":"commodore-breadbin-presentation-stand-and-wall-mount-thick-case","title":"Commodore Breadbin Presentation Stand and Wall Mount (Thick Case)","description":"\u003cdiv class=\"col-sm-8\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab-description\"\u003e\n\u003cp\u003eHave you been wanting to display your various Commodore breadbin computers in a manner that keeps them safe, allows you to gaze upon them all the time and handy when you want to use them?\u003c\/p\u003e\n\u003cp\u003eThis product will do just that for you and more.  It's comprised of two brackets specifically designed to allow your Commodore breadbin computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Vertical spacing of the holes in the bracket is 2 1\/4\".  Bracket holes should be 15 1\/4\" horizontally.  Measurements are center hole to center hole.   Simply mark where you want your computer to hang, level your horizontal 15 1\/4\" line and install star plugs if there is no stud in behind the wallboard.  Measure down 2 1\/4\" and repeat.\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for thick breadbin cases.  Look at the provided photo to determine what style of mount you need.\u003c\/p\u003e\n\u003cp\u003eC64's and VIC-20's may be either style (thick or thin cases).  Please double check before ordering to ensure you get the correct bracket set to fill your needs. \u003c\/p\u003e\n\u003cp\u003eOn the last photo, the white case on the left is a slim version of the breadbin case, and the brown case on the right is the thick version of the breadbin case.  The difference in thickness between the two case types is 4mm in thickness.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216509804787,"sku":"BB-Thick-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/sm_IMG_4193-500x500.jpg?v=1780887171"},{"product_id":"commodore-128-presentation-stand-and-wall-mount","title":"Commodore 128 Presentation Stand and Wall Mount","description":"\u003cdiv class=\"col-sm-8\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab-description\"\u003e\n\u003cp\u003eYou've got yourself a Commodore 128.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and makes it handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Commodore 128 case profile allowing you to mount it on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for Commodore 128.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216514719987,"sku":"C128-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/sm_IMG_3030-500x500.jpg?v=1780887423"},{"product_id":"commodore-64c-presentation-stand-and-wall-mount","title":"Commodore 64c Presentation Stand and Wall Mount","description":"\u003cdiv class=\"col-sm-8\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab-description\"\u003e\n\u003cp\u003eSo, you have a Commodore 64c.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps them safe, allows you to gaze upon them all the time and handy when you want to use them.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Commodore 64c case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Commodore 64c.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216518815987,"sku":"C64c-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/sm_64c.mounted-500x500.jpg?v=1780887514"},{"product_id":"commodore-gs-presentation-stand-and-wall-mount","title":"Commodore GS Presentation Stand and Wall Mount","description":"\u003cdiv class=\"col-sm-8\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab-description\"\u003e\n\u003cp\u003eYou've got yourself an Commodore GS.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Commodore GS case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Commodore GS.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216532545779,"sku":"64GS-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/sm_IMG_3033-500x500.jpg?v=1780887606"},{"product_id":"commodore-plus-4-presentation-stand-and-wall-mount","title":"Commodore Plus 4 Presentation Stand and Wall Mount","description":"\u003cdiv class=\"col-sm-8\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab-description\"\u003e\n\u003cp\u003eYou've got yourself a Commodore Plus 4.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Commodore Plus 4 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Commodore Plus 4.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216546242803,"sku":"Plus4-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/sm_IMG_3037-500x500.jpg?v=1780887696"},{"product_id":"mega-65-presentation-stand-and-wall-mount","title":"Mega 65 Presentation Stand and Wall Mount","description":"\u003cdiv class=\"col-sm-8\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab-description\"\u003e\n\u003cp\u003eSo, you finally got your hands on a Mega65.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps them safe, allows you to gaze upon them all the time and handy when you want to use them.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the Mega65 case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the screws in.  (drywall anchors may be neccessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for Mega65.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216564265203,"sku":"Mega65-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/sm_IMG_2932-500x500.jpg?v=1780887777"},{"product_id":"commodore-usa-64x-presentation-stand-and-wall-mount","title":"Commodore USA 64x Presentation Stand and Wall Mount","description":"\u003cdiv class=\"col-sm-8\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab-description\"\u003e\n\u003cdiv class=\"col-sm-8\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane active\" id=\"tab-description\"\u003e\n\u003cp\u003eHave you been wanting to display your various Commodore breadbin computers in a manner that keeps them safe, allows you to gaze upon them all the time and handy when you want to use them?\u003c\/p\u003e\n\u003cp\u003eThis product will do just that for you and more.  It's comprised of two brackets specifically designed to allow your Commodore USA 64x computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Vertical spacing of the holes in the bracket is 2 1\/4\".  Bracket holes should be 15 1\/4\" horizontally.  Measurements are center hole to center hole.   Simply mark where you want your computer to hang, level your horizontal 15 1\/4\" line and install star plugs if there is no stud in behind the wallboard.  Measure down 2 1\/4\" and repeat.\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the Commodore USA 64x computer, however, it is also compatible with all Commodore breadbin \"thick\" cases. \u003c\/p\u003e\n\u003cp\u003eOn the last photo, the white case on the left is a slim version of the breadbin case, and the brown case on the right is the thick version of the breadbin case.  The difference in thickness between the two case types is 4mm in thickness.  The Commodore USA 64x case is virtually the same dimensions as the \"thick\" breadbin case, however, the 64x case has a variation on the bottom left that requires the special bracket set offered here.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computer are of course not included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-sm-4\"\u003e\n\u003cdiv class=\"btn-group\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216593035507,"sku":"64x-thickBB-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/sm_IMG_4190-500x500.jpg?v=1780887948"},{"product_id":"ti99-4a-presentation-stand-and-wall-mount","title":"TI99\/4A Presentation Stand and Wall Mount","description":"\u003cp\u003eYou've got yourself an TI99\/4A.  When you're not using it or want to display it, how are you going to do it?  With these brackets of course!\u003c\/p\u003e\n\u003cp\u003eThis pair of brackets will store and display in a manner that keeps it safe, allows you to gaze upon it all the time and handy when you want to use it.\u003c\/p\u003e\n\u003cp\u003eIt's comprised of two brackets specifically designed for the TI99\/4A case profile to allow your computer to stand vertical on your desk, table or display case or optionally be mounted on a wall through conveniently positioned recessed screw holes designed into the bracket.  The brackets are designed to put the center of gravity behind the machine when placed on the brackets to ensure it is safe and stable.\u003c\/p\u003e\n\u003cp\u003eWall installation is easy.  Simply place the first bracket level where you'd like the machine to be hung off the wall and screw it in.   This is where it's handy to have a friend, family or spouse handy.  Place the one end of the computer in the mounted bracket, and while holding the computer, place the other bracket on the opposite end of your machine.  Mark level (placing a level on top of your computer as you're holding the bracket and machine against the wall).  The hole through the bracket is there to allow your thumb to press the bracket against the wall, holding it in place.  Once you've positioned the unmounted bracket with the machine and level, remove the level and computer while continuing to hold the bracket in place.  Marking the location of the bracket with a pencil can be done if you so desire.\u003c\/p\u003e\n\u003cp\u003eNow, with the machine and level out of the way, and you're holding the bracket where you've determined it should go, put the screws in.  (drywall anchors may be necessary if you are not screwing into something solid).  With the screws in both brackets, place your machine on the mounts and you're done!\u003c\/p\u003e\n\u003cp\u003eThe brackets are tilted back so your computer won't fall down, and the cradle where the bottom edge of the computer rests is form fitted to match the bottom edge of your machine.  These are very robust brackets.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis bracket is specifically designed for the TI99\/4A.\u003c\/p\u003e\n\u003cp\u003eYou will receive a left and right bracket printed in the color of your choice.  Screws and computers are of course not included.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ToTsRC\/ToTsRETRO","offers":[{"title":"Default Title","offer_id":49216608698611,"sku":"TI994A-WM","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/files\/sm_IMG_3060-500x500.jpg?v=1780888080"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/5239\/3459\/collections\/IMG_2956.jpg?v=1780885307","url":"https:\/\/totsrc.com\/collections\/retro-computer-presentation-stands-and-wall-mount\/wall-mount.oembed","provider":"ToTsRC\/ToTsRETRO","version":"1.0","type":"link"}